JWELL Transfer Release Coating & Laminating Line
JWELL's transfer release coating and laminating line coats and laminates functional layers for release films, specialty packaging materials, UV-curable coatings, digital leather and heat-transfer decorative products, on substrates 800–2100 mm wide at working speeds of up to 80 m/min depending on material and process.
Key Selling Points
- Coating Options: Micro-gravure reverse coating or direct gravure coating units, with interchangeable trolley mechanisms and multi-station coating or printing configurations.
- Energy-Efficient Oven: Drying oven designed for high efficiency and low energy consumption.
- Closed-Loop Tension: Full closed-loop tension control keeps web tension stable at production speed.
- Laminating Options: Two-roll or three-roll laminating stations can be configured.
- Flexible Unwinding and Rewinding: Single-station or double-station unwinding and single-station or dual-station rewinding (with follower mechanism), with manual, flying-blade or gear-blade cutting.
Technical Specifications
| Parameter | Specification |
| Substrate types | BOPET, BOPP, PE, paper, non-woven fabric, etc. |
| Substrate width | 800–2100 mm |
| Working speed | Up to 80 m/min (depending on material and process) |
| Coating methods | Reverse gravure coating unit; forward gravure coating unit |
| Laminating methods | Two-roll laminating; three-roll laminating, etc. |
| Unwinding structure | Single-station or double-station |
| Rewinding structure | Single-station or dual-station (with follower mechanism) |
| Max. roll diameter (unwinding / rewinding) | 800 mm |
| Cutting type (unwinding / rewinding) | Manual, flying blade, gear blade |
| Clamping system (unwinding / rewinding) | Pneumatic fixed cone, movable open-close arm cone, air shaft |
| Oven heating options | Electric heating, steam heating, heat transfer oil heating, natural gas heating, hot air heating, etc. |
Application Scenario
Typical products include release films, specialty packaging materials, UV-curable coating products, digital leather materials and heat-transfer decorative films.
Product Description
This line is designed for manufacturers of release liners and specialty coated or laminated films. Coating units can be selected and combined to suit the coating material and film structure, and interchangeable trolley mechanisms allow different coating or printing stations to be used on the same frame.
Unwinding and rewinding support manual, flying blade or gear blade cutting, with pneumatic fixed cone, movable open-close arm cone or air shaft clamping. Working speed of up to 80 m/min depends on the material and process. Contact JWELL with your substrate, coating material, width and target application for a configured proposal.
