JWELL PC-UV Co-extruded Corrugated board Production Line
JWELL supplies a PC-UV co-extrusion line for manufacturing corrugated polycarbonate boards with customer-specified wave profiles for agricultural and architectural projects.
Key Selling Points
- Integrated UV Layer: Co-extrusion applies UV protection during PC board production.
- Profile Selection: Adjustable forming molds support customer-specified corrugated wave shapes.
- Application Fit: Configure board for greenhouses, breeding sheds, sports halls, and stations.
- Process Monitoring: Source-described checks cover formulation, forming, light transmission, and UV isolation.
Technical Specifications
| Main extruder model | Output | Installed power | Line dimensions (L × W × H) | Product thickness | Price ($) | Product width |
|---|---|---|---|---|---|---|
| JWS-130/35-2200 | 550–600 kg/h | 680 kW | 25 m × 7 m × 4.2 m | 2–10 mm | 306k | 1500–1950 mm |
| JWS-130/35-1400 | 600 kg/h | 600 kW | 25 m × 6 m × 4.2 m | 1.5–10 mm | 264k | 1000–1200 mm |
Application Scenario
Product Description
The JWELL PC corrugated board extrusion line is designed to manufacture polycarbonate corrugated boards with a co-extruded UV-protective layer. The supplied product document describes coordinated material dosing, extrusion, co-extrusion, forming, and inspection. For buyers planning outdoor board production, this configuration puts UV protection into the extrusion process while retaining the light transmission and impact performance associated with the resulting PC board. The exact finished-board performance depends on the chosen resin, formulation, profile, and operating conditions.
The line is intended for producers serving agricultural greenhouses, breeding sheds, sports halls, stations, and other building roofs or wall applications named in the source. Its adjustable forming molds support different corrugated wave shapes, allowing the purchaser to discuss the required profile with JWELL before equipment configuration. The source also describes process controls from raw-material proportioning through final forming, including monitoring of board light transmission and UV-blocking performance.
Two equipment sizes appear in the supplied specification table, with different stated board-width, thickness, output, installed-power, and footprint values. Several of those figures conflict with JWELL’s published product page or brochure, so the table below is retained as source evidence and marked for technical confirmation. Request a configuration review with the target board width, thickness, profile drawing, UV-layer requirements, raw material, and expected capacity. JWELL can then confirm the applicable extruder arrangement, forming equipment, utilities, floor space, and current quotation for the intended production line.
